USB Rechargeable Motion Sensor LED Wall Light with Intelligent Night Light for Home Bedroom Hallway – Warm Light

USB Rechargeable Motion Sensor LED Wall Light with Intelligent Night Light for Home Bedroom Hallway – Warm Light,

How to Use the Intelligent Night Light

Step 1: Charging the Light

1. Connect the provided USB cable to the night light.
2. Plug the other end of the USB cable into a USB power source (e.g., wall adapter, computer, power bank).
3. Allow the light to fully charge until the indicator light turns green. This may take around 2-3 hours.

Step 2: Installation

1. Decide where you want to install the night light. It can be used in various places such as the bedroom, hallway, or bathroom.
2. Ensure the surface is clean and dry.
3. Peel off the protective backing from the adhesive patch on the back of the light.
4. Stick the light firmly to the desired location.

Step 3: Using the Motion Sensor

1. Once installed, the light will automatically turn on when it detects motion in a dark environment.
2. It will stay on for approximately 0 seconds after the last detected motion.
3. If there is sufficient ambient light, the light will not turn on even if motion is detected.

Step 4: Adjusting the Light

You can adjust the brightness of the light by covering partially or fully the built-in light sensor with your hand or an object. Experiment to find the desired brightness level.

Step 5: Recharging the Light

1. When the light starts to dim or the indicator light turns red, it’s time to recharge the light.
2. Repeat Step 1 to recharge the light. Ensure it’s fully charged before use.

Enjoy the convenience and energy-saving benefits of the Intelligent Night Light in your home!

, ,