Bluetooth Headset for Phones and PC with Noise Cancelling Mic – Designed for Truckers

Bluetooth Headset for Phones and PC with Noise Cancelling Mic – Designed for Truckers,

How to Use the Wireless Trucker Bluetooth Headset

Getting Started:

1. Unbox the package and ensure that all the included items are there.
2. Read the user manual for detailed instructions and specifications.
3. Charge the headset using the provided USB charging cable. It takes approximately 2 hours to fully charge the battery.
4. Ensure that Bluetooth is enabled on your device (smartphone, PC, etc.).
5. Put the headset in pairing mode by pressing and holding the multifunction button until the LED light starts flashing blue and red.
6. On your device, search for Bluetooth devices and select “MX” to connect.
7. If prompted for a pairing password, enter “0000”, “8888”, “1111”, or “1234”.

Basic Operations:

1. Power On/Off: Press and hold the multifunction button for about 3 seconds to turn the headset on or off. You will hear a voice prompt when it is powered on.
2. Answer/End Calls: Press the multifunction button once to answer an incoming call. Press it again to end the call.
3. Reject Calls: To reject an incoming call, press and hold the multifunction button for about 2 seconds. You will hear a beep indicating that the call is rejected.
4. Mute/Unmute: During a call, press the mute button located on the headset to mute or unmute your microphone.
5. Adjust Volume: Use the volume up and down buttons on the headset to increase or decrease the volume.
6. Switch Between Devices: If you have connected the headset to two devices simultaneously, you can switch between them by pressing and holding the multifunction button for about 2 seconds.

Frequently Asked Questions:

1. How to Reconnect: When the headset is turned on, it will automatically reconnect to your previously paired device. If it doesn’t, go to the Bluetooth settings on your device and select “MX” to reconnect.
2. How to Clear Pairing Record: In the power-on state, press and hold both the multifunction button and volume increase button together until the purple indicator light flashes once. This clears the pairing record, and the headset will no longer connect to the previously connected device.

If you have any other questions or issues with the product, please refer to the user manual or contact our customer support for assistance.

, , Willful