Portable Handheld Endoscope with 5.5mm Waterproof HD Camera, 200w, 2-meter Cable, and Screen Display: P40

Portable Handheld Endoscope with 5.5mm Waterproof HD Camera, 200w, 2-meter Cable, and Screen Display: P40,

HOW TO USE

1. Preparation

1. Make sure the P40 Hd Endoscope is fully charged by connecting it to a power source using the provided USB cable.
2. Ensure that the screen is clean and free from any smudges or debris.
3. Check that the 5.5mm endoscope probe and the connection cable are securely attached.

2. Power On

1. Press and hold the Power button located on the side of the display screen to turn on the device.
2. A startup sound will be heard, and the screen will illuminate.

3. Adjusting LED Lights

1. Press the LED Light button on the control panel to activate the LED lights.
2. Use the “+” and “-” buttons to adjust the brightness level of the LED lights according to your needs.

4. Viewing and Capturing

1. Hold the handheld endoscope and inspect the desired area.
2. The live feed from the endoscope will be displayed on the screen in real-time.
3. To capture images or record videos, press the corresponding buttons on the control panel.
4. The captured media will be saved onto a micro-SD card (not included).

5. Power Off

1. To turn off the device, press and hold the Power button until the screen goes blank.
2. Disconnect the endoscope probe and the connection cable from the device after use.

6. Maintenance

1. Clean the endoscope probe with a soft cloth and mild detergent after each use.
2. Store the device in a dry and safe place to prevent damage.

For more detailed instructions, please refer to the user manual that comes with the product.

, ,