Uncover Your True Potentialy Portable Bluetooth Tester for Water Quality – 4-in-1 Pen for pH/TDS/EC/Temp – Ideal for Drinking Water and Aquariums with Backlight

Portable Bluetooth Tester for Water Quality – 4-in-1 Pen for pH/TDS/EC/Temp – Ideal for Drinking Water and Aquariums with Backlight,

How to Use the 4-in-1 9908 Water Quality Test Pen

Step 1: Download and Install the Mobile App

1. Search for the Mobile App in your device’s app store.
2. Download and install the app on your smartphone or tablet.

Step 2: Connect the Test Pen to the App

1. Turn on the Bluetooth feature on your smartphone or tablet.
2. Open the app and follow the on-screen instructions to pair the test pen with your device.

Step 3: Prepare the Test Pen for Measurement

1. Remove the cap from the test pen.
2. Make sure the electrode head is clean and dry.
3. If needed, calibrate the test pen according to the app’s instructions or user manual.

Step 4: Perform Water Quality Testing

1. Dip the electrode head of the test pen into the water sample to be tested.
2. Wait for a few seconds until the measurement stabilizes.
3. Read the measurement values displayed on the app.

Step 5: Adjust Settings and Save/Share Data

1. Use the app to set the measurement maximum or minimum value if desired.
2. Adjust the backlight settings according to your preference.
3. Save and export the measured data for further analysis or sharing.

Step 6: Clean and Maintain the Test Pen

1. After each use, rinse the electrode head with clean water and wipe it dry.
2. Store the test pen with the cap on to protect the electrode head.

With the 4-in-1 9908 Water Quality Test Pen, you can easily monitor the pH, EC, TDS, and temperature of your drinking water, aquariums, and more. Enjoy precise measurements and convenient data management with this portable Bluetooth tester.

, ,