Industrial Endoscope Borescope Inspection Camera with 4.3inch HD 1080P Display Screen, 8 LEDs, 8mm Lens, Built-in 2000mAh Rechargeable Lithium Battery, and 5m Cable

Industrial Endoscope Borescope Inspection Camera with 4.3inch HD 1080P Display Screen, 8 LEDs, 8mm Lens, Built-in 2000mAh Rechargeable Lithium Battery, and 5m Cable,

How to Use the Industrial Endoscope Borescope Inspection Camera

Step 1: Charging the Battery

1. Connect the camera to a USB device using the provided cable.
2. Ensure the camera is turned off.
3. The LED indicator will turn red to indicate charging and will turn off when the battery is fully charged.

Step 2: Turning on the Camera

1. Press and hold the power button located on the control unit to turn on the camera.

Step 3: Adjusting the LED Lights

1. Use the LED brightness control buttons to adjust the intensity of the built-in LED lights.
2. Find the optimal brightness setting for your inspection needs.

Step 4: Using the Display Screen

1. The 4.3-inch HD 1080P display screen provides a clear view of the inspection area.
2. Position the camera probe to the desired area and view the live feed on the display screen.

Step 5: Capturing Photos or Recording Videos

1. Insert a TF card into the designated slot on the control unit.
2. Press the photo or video button to capture photos or start/stop video recording.

Step 6: Exploring Hard-to-Reach Areas

1. Utilize the soft and flexible wire to bend and navigate through curved holes or obstacles.
2. Gently maneuver the camera probe to inspect the desired area.

Step 7: Waterproof Function

1. The IP67 waterproof function allows you to use the camera underwater or in wet environments.
2. Exercise caution when submerged and ensure the camera is dry before storage.

Step 8: Turning off the Camera

1. Press and hold the power button to turn off the camera.
2. Ensure the camera is safely stored in a dry location.

, ,