Handheld Industrial Borescope with Waterproof 4.3-inch Screen and 3.9mm HD Camera, 5-meter Length

Handheld Industrial Borescope with Waterproof 4.3-inch Screen and 3.9mm HD Camera, 5-meter Length,

[HOW TO USE]

Step 1: Prepare the Endoscope

1. Ensure the endoscope is fully charged by connecting it to a power source with the provided USB cable.
2. Insert a TF card into the TF card slot, if you want to capture photos or record videos.
3. Make sure the endoscope lens is clean before use.

Step 2: Power On

1. Press and hold the power button located on the endoscope handle until the screen lights up.
2. The display will show the live feed from the endoscope camera.

Step 3: Adjusting LED Lights

1. Use the “LED Light” adjustment buttons (marked with “+” and “-“) to control the brightness of the LED lights.
2. Adjust the lights according to the lighting conditions of your inspection area for optimal visibility.

Step 4: Navigating the Menu

1. Press the “Menu” button to access the main menu.
2. Use the up and down buttons to navigate through the different options.
3. Press the “OK” button to confirm your selection.

Step 5: Capture Photos

1. Select the “Photo” option from the menu.
2. Use the up and down buttons to adjust photo resolution if desired.
3. Position the endoscope lens at the desired spot and press the “OK” button to capture a photo.

Step 6: Record Videos

1. Select the “Video” option from the menu.
2. Use the up and down buttons to adjust video resolution and duration if desired.
3. Press the “OK” button to start recording and press it again to stop.

Step 7: Power Off

1. Press and hold the power button until the screen turns off to power off the endoscope.
2. Ensure the endoscope is properly stored for future use.

With these simple steps, you can effectively use the 4.3-inch Screen Waterproof Endoscope 3.9mm HD Handheld Industrial Borescope 5 meters for your inspection needs.

, ,