8GB DDR4 RAM Upgrade

8GB DDR4 RAM Upgrade,

How to use the 8GB DDR4 2133MHz PC4-17000 288-PIN NON-ECC UDIMM Computer RAM Upgrade

Step 1: Shut down your computer

• Save any open files and close all applications.
• Click on the Start button and select “Shut down”.

Step 2: Open your computer case

• Unplug all cables from your computer.
• Remove the screws on the back or side panel of your computer case.
• Slide off the side panel to access the inside of your computer.

Step 3: Locate the RAM slots

• Look for the existing RAM modules on your computer’s motherboard.
• Identify the empty slots where you will install the new RAM module.

Step 4: Ground yourself

• Prevent any static electricity from damaging your computer’s components by grounding yourself.
• Touch a metal part of the computer case to discharge any static electricity.

Step 5: Install the new RAM module

• Hold the new RAM module by its sides, avoiding touching the gold contacts.
• Align the notch on the RAM module with the slot on the motherboard.
• Gently push the module into the slot until it clicks into place.

Step 6: Close your computer case

• Put the side panel back onto your computer case.
• Tighten the screws to secure the panel.
• Reconnect all cables to your computer.

Step 7: Power on your computer

• Plug in the power cable and press the power button to turn on your computer.

Congratulations, you have successfully installed the 8GB DDR4 2133MHz PC4-17000 288-PIN NON-ECC UDIMM Computer RAM Upgrade!

, , Arch Memory