Nail-Free Wall Mount Soap Dispenser

Nail-Free Wall Mount Soap Dispenser,

How to Use the Nailing Free Soap Dispenser Wall Mount

Step 1: Assembling the Unit

1. Start by attaching the dispenser bottle to the wall mount using the provided screws.
2. Secure the bottle tightly to ensure it does not come loose during use.
3. Repeat this process if you have multiple dispenser bottles.

Step 2: Mounting the Unit

1. Choose a suitable location in your bathroom or kitchen to mount the dispenser.
2. Mark the position where you want to install the dispenser on the wall.
3. Use a drill to create holes in the marked spots.
4. Insert wall plugs into the holes.
5. Align the dispenser with the wall plugs and secure it using the provided screws.

Step 3: Filling the Dispenser

1. Remove the cover of the dispenser bottle.
2. Pour your desired liquid (shower gel, shampoo, washing lotion, etc.) into the bottle.
3. Make sure not to overfill the bottle, leaving some room for expansion.
4. Securely tighten the cover back onto the bottle.

Step 4: Dispensing the Liquid

1. Place your hand under the dispenser nozzle.
2. Press the dispenser pump down to dispense the desired amount of liquid.
3. Release the pump to stop the flow.

Step 5: Maintenance and Cleaning

1. Regularly clean the dispenser to prevent clogging and build-up.
2. Remove the bottle from the wall mount by unscrewing it.
3. Rinse the bottle thoroughly with warm water.
4. Use a mild detergent to clean the dispenser if necessary.
5. Allow the bottle and dispenser to dry completely before reassembling.

With these simple steps, you can easily enjoy the convenience of our nailing free soap dispenser wall mount in your bathroom or kitchen!

, ,