Home Security Water Immersion Sensor: Remote Alarm Flood Water Leak Detector with Soaking Sensor – White

Home Security Water Immersion Sensor: Remote Alarm Flood Water Leak Detector with Soaking Sensor – White,

HOW TO USE

Step 1: Install the battery

1. Open the battery cover located at the bottom of the sensor
2. Insert the battery into the battery compartment, ensuring the correct polarity
3. Close the battery cover securely

Step 2: Place the sensor

1. Choose a suitable location for the sensor where you want to detect water leaks
2. Make sure the sensor is level and stable
3. Securely attach the sensor using the adhesive tape or screws (not included)

Step 3: Connect to the app

1. Download and install the designated app on your smartphone from the App Store or Google Play Store
2. Open the app and create a new account if needed
3. Follow the on-screen instructions to connect the sensor to your app

Step 4: Testing and using the sensor

1. Make sure the sensor is connected to the app and the app is properly set up
2. Place the sensor in an area where you want to test for water leaks
3. Pour a small amount of water on the sensor to simulate a leak
4. Check if the app sends a notification or alarm for the detected water leak

Step 5: Maintenance and battery replacement

1. Regularly check the sensor and clean it if necessary
2. If the battery is running low, replace it with a new one of the same type and polarity

Enjoy the peace of mind that comes with the protection against water leaks provided by this smart water immersion sensor!

, ,