Smart Multimeter with Large Color Screen

Smart Multimeter with Large Color Screen,

How to Use the Bside Smart Large Screen Multimeter (S10/S11)

Step 1: Power On/Off

1. Press the power button located on the device to turn it on.
2. To turn off the multimeter, press and hold the power button for a few seconds until the screen goes blank.

Step 2: Selecting Measurement Mode

1. Use the function switch on the side of the multimeter to select the desired measurement mode (AC voltage, DC voltage, resistance, etc.).

Step 3: Taking Measurements

1. Ensure the multimeter is properly connected to the circuit or component you want to measure.
2. Refer to the included user manual to identify the correct connections and ranges for your specific measurement.
3. Place the multimeter probes on the appropriate points of the circuit/component. The black probe should be connected to the COM (common) terminal, and the red probe to the input terminal.
4. Read the measurement value displayed on the large screen.

Step 4: Additional Features

• Use the buttons on the device to navigate between different modes, adjust settings, or access extra functions.
• Refer to the user manual for detailed instructions on utilizing advanced features such as data hold, min/max recording, and backlight controls.

Step 5: Power Off

1. After using the multimeter, turn it off by pressing and holding the power button until the screen goes blank.
2. Disconnect the probes from the circuit/component.

We hope this guide helps you understand the basic operation of the Bside Smart Large Screen Multimeter (S10/S11). For further assistance, please refer to the included user manual or contact our customer support.

, ,