Cordless Brushless Electric Impact Driver Wrench with Screwdriver

Cordless Brushless Electric Impact Driver Wrench with Screwdriver,

How to Use the Brushless Electric Wrench Impact Driver Cordless Electric Screwdriver Wrench

Preparation

1. Charge the wrench to ensure it has enough power for operation.
2. Check the torque settings and adjust if necessary.

Attaching the Screwdriver Bit

1. Select the appropriate screwdriver bit for your task.
2. Insert the selected screwdriver bit firmly into the chuck of the wrench.
3. Tighten the chuck securely to ensure the bit is held in place.

Using the Wrench

1. Hold the wrench firmly with one hand on the handle and the other hand on the body for stability.
2. Position the screwdriver bit onto the screw that needs to be tightened or loosened.
3. Press the power button to activate the wrench.
4. Apply gentle pressure on the screwdriver bit to engage it with the screw.
5. Gradually increase the speed using the stepless speed change switch as needed.

Adjusting the Torque Settings

1. Locate the torque adjustment settings on the wrench.
2. Using the screwdriver bit, turn the torque adjustment dial to the desired setting. Higher numbers indicate higher torque.

Using the LED Work Light

1. The wrench is equipped with an LED work light to provide illumination in dark or dimly lit areas.
2. To activate the LED work light, press the dedicated light button.

Safe Operation

1. Always wear appropriate safety gear, such as goggles and gloves, when using the wrench.

Maintenance

1. After use, clean the wrench and remove any dust or debris.
2. Store the wrench in a dry and secure place to prevent damage.

, ,